Security UK for electric fence rope and electric fence rope, hand electric fencing, electric fencing to, electric fencing kit articles and information
Below, you'll find extensive information on leading
electric fence rope articles and products to help you on your way
to success.
You can also click here to see the rest of our related articles
Home Security Systems - How To Buy Electric Fencing Materials And Equipment
By Jeffrey Parker
Residential, or small commercial or industrial electric fences are a relatively simple proposition to fit, in most cases. Usually, you would be looking at a "wall top" type of fence, and this is what we describe in this article.
Before beginning to work out what you'll need for your project, there are a few things you'll need to do.
Now that the basics are covered, you will need to buy the supplies for your fence, these are listed hereunder, along with tips to help you calculate the quantities you'll need.
Brackets
Usually, steel extension brackets are fitted to the top of a wall or fence. These are bolted, or fitted using coach screws, and come in galvanized and powder coated varieties. Ask for brackets pre fitted with insulators (the plastic fittings that keep the electrical wires away from the steel bracket.)
To work out how many you need, calculate your intermediate brackets by dividing the length of each line of fencing by between 12 and 16 feet (or the nearest measurement according to the fence posts that are already there.) Then add another bracket for each corner and end.
Tensioners
It's very important for wires on to be under tension, because slack wires may touch the brackets; carrying them, and cause a short
or false alarm.
There are a wide variety of tensioners available, from spring to ratchet types, all costing different amounts, and offering varying degrees of tension. Speak to your supplier for the best option for your project.
To calculate the quantity of tensioners, simply take the number of strands or wires, multiply it by the number of end or corner brackets, and multiply the answer by two. You should have a few left, but rather too many than too few!
Conductors
Next on your shopping list is the conductors or wires. These can be either stainless steel, or galvanized mild steel.
In many cases, wire is sold according to the weight of the roll, but you can calculate your requirements by taking your fence length, and multiplying it by the number of strands you are using. I like to add around ten percent for loops and wastage.
Electronics
About all that's left is the electronics. These would consist of an energizer, and possibly a siren and strobe light, to warn you of shorts on the fence line.
Energizers for domestic use are typically single zone units, meaning they don't split your fence into different sections, but considering that most residential applications are small, that's no real problem.
More important though is the quality of the unit. Look for robust, well made units, with a weather resistant housing. Try to avoid cheap imports, or those that don't have a great manufacturer's warranty. Remember, the energizer unit is electronic, and like all electronics, they may have factory faults. You'll want a good returns policy!
Accessories
There are quite a few extra hardware items you may need, from ferrules to warning signs, screws or bolts, sealant and a few other bits and pieces, but your supplier should be able to advise you on those.
All in all, a domestic or small commercial electric fence can cost as little as a few hundred dollars, and will provide added peace of mind!
We strive to provide only quality articles, so if there is a specific topic related to electric fencing that you would like us to cover, please contact us at any time.
And again, thank you to those contributing daily to our electric fence rope website.